Pop-up Sprinklers for Turf, Landscape and Agriculture

A pop-up sprinkler is a retractable irrigation head that sits flush with the ground until water pressure lifts it into its watering position, then drops back out of sight when the cycle ends. Because nothing protrudes above the surface between irrigation events, pop-up sprinklers are the standard choice for turf, landscapes and low-growing crops where mowers, vehicles and foot traffic would otherwise damage fixed risers. IRRIGRAIN pop-up sprinklers cover both mainstream technologies — gear-driven rotary heads for large, even coverage, and fixed spray heads for precise small-area watering — in a range of pop-up heights to suit the crop or landscape you are protecting. Every head is built for long field life, simple servicing and consistent distribution, supplied directly from our factory to your project.

Why Turf Managers and Growers Choose Pop-up Sprinklers

Pop-up heads solve problems that fixed sprinklers simply cannot. Because the mechanism stays below grade until it is needed, the surface stays clear and the head is protected from the worst of field abuse. Five reasons make them the preferred choice for professional irrigators:

1. Clean, safe surfaces. The head retracts fully below grade between cycles, leaving no tripping hazard, no obstacle for mowers or harvesters and no risk of impact damage to the unit itself.
2. Consistent, even coverage. Gear-driven rotary models distribute water uniformly across large areas with matched precipitation rates, reducing dry spots and over-watering at the edges of each zone.
3. Better water efficiency. Adjustable arcs let you water strips, borders and odd-shaped zones without watering paths and pavements. Fewer runoff points mean more of every cubic meter reaches the root zone.
4. Durability in the field. ABS/PP bodies resist UV light and chemical fertilizers, while stainless steel springs and rubber seals keep the mechanism reliable season after season.
5. Lower long-term cost. Protected below grade when not running, pop-up heads suffer far less mechanical damage than exposed risers, cutting replacement frequency and downtime across the system.

Common Applications

Pop-up sprinklers adapt to almost any situation where a clean surface and reliable overhead watering are required:

• Turf and sports fields — golf courses, football and cricket grounds, parks and recreation areas where mowing and play happen every day.
• Landscape and amenity areas — hotel grounds, resorts, office campuses and public gardens where a clean, finished appearance matters.
• Vegetable and berry crops — low-growing row crops benefit from overhead watering without fixed hardware in the way of cultivation and harvest.
• Greenhouses and nurseries — compact pop-up sprays deliver gentle, uniform irrigation to potted stock and seedlings.
• Dust control and cooling — short pop-up sprays are a practical solution for stockyards, loading areas and event spaces.
• Frost protection — overhead pop-up sprays on low risers protect tender crops and nursery stock from light frost events.

Choosing the Right Pop-up Sprinkler

Match the head to your water supply, crop height and area shape. Use the table below as a starting point, and our engineers will confirm the exact figures for your site:

Selection factor	Typical range	Notes
Pop-up height	2” / 4” / 6” / 12” (50 – 300 mm)	Taller risers clear tall grass and crops
Operating pressure	1.5 – 4.5 bar	Rotors need higher pressure than sprays
Throw radius	6 – 15 m (rotary); 2 – 5 m (spray)	Space heads at 50 – 65% of wet diameter
Arc adjustment	40° – 360°	Part-circle for strips, full circle for open areas
Flow rate	0.5 – 4 m³/h (model dependent)	Size each zone to your available supply

Not sure which configuration fits your system? Send us your flow rate, pressure, area and crop type — we will recommend the right head, riser and spacing for the job.

OEM & Custom Orders

As a factory-direct manufacturer, IRRIGRAIN supplies pop-up sprinklers in bulk at competitive pricing, with flexible MOQs on standard models. Because we control the production line, you buy at factory prices without middlemen and get consistent quality across every batch. OEM support includes custom nozzle sizes, body colors, private labeling and tailored packaging. Whether you are a distributor building your own brand or a contractor standardizing a project line, we will work from your specifications to deliver a product that matches your market. Email us at cj226144@gmail.com with your requirements for a quotation — we typically respond within one business day.